# You can modify this language localization file
# locale.properties for Ch IDE user interface.
# To make your modification available in Ch IDE in the next release
# and available for others to use,
# please send your modified file to info(@)softintegration.com

# locale.properties defines the localised text for the user interface
# Some definitions are commented out because they duplicate another string
# The format of each line is original=localised, such as File=&Fichier
# Even though the original text may have ellipses "..." and access key
# indicators "&" in the user interface, these do not appear in this file
# for the original texts. Translated texts should have an access key indicator
# if needed as the translated text may not include the original access key.
# Ellipses are automatically added when needed.
# The "/" character should not be used in menu entries as on GTK+ the "/" is
# used to specifiy the menu hierarchy and so will produce extra menu items.
# Each original text may have only one translation, even if it appears in
# different parts of the user interface.

# Please state any further license conditions and copyright notices you desire.
# If there are no further notices then contributed translations will be assumed
# to be made freely available under the same conditions as SciTE.
# Email addresses included in this file may attract spam if the file is published.

# Contributors for the german language support:
# - Original german translator is unknown
# - Jochen Hanne, jochen@h-a-n-n-e.de (jh)
# - Johann L�fflmann, jonelo@jonelo.de (jl)
# - Lutz Mischa Heitm�ller, lmh@syscologne.de (lmh)
# - Georg Dahn, gorgyd@yahoo.co.uk (gd)
# - Michael Stein, m_stein_m@web.de (ms)
# - Thomas Tampe (tt)

# Updated german translations
# - v1.51: jh
# - v1.52: jh and jl
# - v1.53: jh and jl
# - v1.54: jh and jl
# - v1.55: lmh
# - v1.56: jh
# - v1.57: jh
# - v1.58: jh
# - v1.59: jh
# - v1.60: jh
# - v1.61: jh
# - v1.62: jh
# - v1.63: jh
# - v1.67: gd
# - v1.68: ms
# - v1.72: tt
# - v1.73: tt

# Define the encoding of this file so that on GTK+ 2, the file can be
# reencoded as UTF-8 as that is the GTK+ 2 user interface encoding.
# A common choice for European users is LATIN1. For other locales look at
# the set of encodings supported by iconv.
translation.encoding=LATIN1

# Menus

# File menu
File=&Datei
New=&Neu
Open=�&ffnen
Open Selected Filename=&Markierten Dateinamen �ffnen
Revert=Neu &laden
Close=S&chlie�en
Save=&Speichern
Save As=Speichern &unter
Export=&Exportieren
As HTML=Als &HTML
As RTF=Als &RTF
Page Setup=Seite einr&ichten
Print=&Drucken
Load Session=Sitzung l&aden
Save Session=Si&tzung speichern
Exit=&Beenden

# Edit menu
Edit=&Bearbeiten
Undo=&R�ckg�ngig
Redo=&Wiederholen
Cut=A&usschneiden
Copy=&Kopieren
Paste=E&inf�gen
Delete=&L�schen
Select All=&Alles markieren
Copy as RTF=Als &RTF kopieren
Match Brace=&Zugeh�rige Klammer suchen
Select to Brace=Bis Klammer &markieren
Show Calltip=&Calltip anzeigen
Complete Symbol=&Symbol erg�nzen
Complete Word=&Wort erg�nzen
Expand Abbreviation=Abk�rzung &erweitern
Block Comment or Uncomment=Bl&ock-Kommentar ein|aus
Box Comment=Box-Kommentar
Stream Comment=Stream-Kommentar
Make Selection Uppercase=Markierung in &Gro�schrift umwandeln
Make Selection Lowercase=Markierung in &Kleinschrift umwandeln

# Search menu
Search=&Suchen
Find=S&uchen
Find Next=&Weitersuchen
Find Previous=&R�ckw�rts suchen
Find in Files=&Dateien durchsuchen
Replace=&Ersetzen
Go to=&Gehe zu
Next Bookmark=&N�chstes Lesezeichen
Previous Bookmark=&Vorheriges Lesezeichen
Toggle Bookmark=&Lesezeichen ein|aus
Clear All Bookmarks=&Alle Lesezeichen l�schen

# View menu
View=&Ansicht
Toggle current fold=Aktuelle &Code-Falte ein|aus
Toggle all folds=&Alle Code-Falten ein|aus
Full Screen=&Vollbild
Tool Bar=&Symbolleiste
Tab Bar=&Karteireiter
Status Bar=&Statusanzeige
Whitespace=&Leerzeichen
End of Line=&Zeilenende
Indentation Guides=&Einr�ckungshilfe
Line Numbers=Zeilen&nummern
Margin=&Rand
Fold Margin=Rand f�r &Code-Falten
Output=A&usgabe
Parameters=&Parameter

# Tools menu
Tools=E&xtras
Compile=&Kompilieren
Build=&Erstellen
Go=&Starten
Stop Executing=&Ausf�hrung stoppen
Next Message=&N�chste Nachricht
Previous Message=&Vorherige Nachricht
Clear Output=Ausgabe &l�schen
Switch Pane=&Fenster wechseln

# Options menu
Options=&Optionen
Always On Top=&Immer im Vordergrund
Vertical Split=&Vertikale Teilung
Line End Characters=Zeilenende-Zeichen
CR + LF=CR &+ LF
CR=&CR
LF=&LF
Convert Line End Characters=Zeilenende-Zeichen &konvertieren
Change Indentation Settings=&Einr�ckungsoptionen
Use Monospaced Font=&Feste Schriftart benutzen
Open Local Options File=&Lokale Einstellungen �ffnen
Open User Options File=&Benutzer-Einstellungen �ffnen
Open Global Options File=&Globale Einstellungen �ffnen
Open Abbreviations File=&Abk�rzungs-Datei �ffnen

# Language menu
Language=Sp&rache

# Buffers menu
Buffers=&Fenster
Previous=&Vorheriges
Next=&N�chstes
Close all=&Alle schlie�en

# Help menu
Help=&Hilfe
About Sc1=&�ber Sc1
About SciTE=&�ber SciTE

# Dialogs

# Generic dialog
OK=&OK
Cancel=&Abbrechen
Yes=&Ja
No=&Nein

# About dialog
About SciTE=�ber SciTE
# This is to add something like: Swahili translation 1.41.1 by Neil Hodgson
TranslationCredit=Deutsche �bersetzung f�r Version 1.72
Contributors:=Beitragende:

# Open, Save dialogs
Open File=Datei �ffnen
Save File=Datei speichern
Save File As=Datei speichern unter
Export File As HTML=Als HTML-Datei exportieren
Export File As RTF=Als RTF-Datei exportieren
Save Current Session=Arbeitssitzung speichern
Custom Filter=Benutzerfilter

# Find in Files dialog
#Find in Files=
Find what:=&Suchbegriff:
Files:=&Dateien:
#Find=

# Go To dialog
Go To=&Gehe zu
Destination Line Number:=&Zeilennummer
Current line:=Aktuelle Zeile:
Last line:=Letzte Zeile:

# Indentation Settings dialog
Indentation Settings=Einr�ckungsoptionen
Tab Size:=&Tabulator-Gr��e:
Indent Size:=&Einr�ckungs-Gr��e:
Use tabs:=Tabulatoren &verwenden:

# Replace and Find dialogs
#Replace=
#Find=
#Find what:=
Replace with:=Ersetzen &durch:
Match whole word only=&Nur ganzes Wort suchen
Match case=&Gro�-|Kleinschreibung
Regular expression=&Regul�re Ausdr�cke
Wrap around=�ber Dateiende &weitersuchen
Transform backslash expressions=&Backslash umwandeln
#Find Next=
Replace All=&Alle ersetzen
Replace in Selection=In &Markierung ersetzen
#Close=
Direction=&Richtung
Reverse direction=&Umgekehrte Richtung
Up=&Hinauf
Down=Hin&unter

# Parameters dialog
Execute=&Ausf�hren
Set=&Setzen

# Other UI strings
Untitled=Unbenannt

# Properties used in global options
Text=Text
All Source=Alle Quelldateien
All Files (*.*)=Alle Dateien (*.*)

# Messages
# Messages may contain variables such as file names or search strings indicated
# by ^0 which are replaced by values before display. ^1, ^2, ... may be used in the future.
Can not find the string '^0'.='^0' konnte nicht gefunden werden.
Find string must not be empty for 'Replace All' command.=Der Suchbegriff darf nicht leer sein, wenn 'Alle ersetzen' gew�hlt wurde.
Selection must not be empty for 'Replace in Selection' command.=F�r 'In Markierung ersetzen' muss eine Markierung vorhanden sein.
No replacements because string '^0' was not present.=Es hat keine Ersetzung stattgefunden, da '^0' nicht gefunden wurde.
Could not open file '^0'.=Konnte Datei '^0' nicht �ffnen.
Could not save file '^0'.=Konnte Datei '^0' nicht speichern.
Save changes to '^0'?=�nderungen in '^0' speichern?
Save changes to (Untitled)?=�nderungen in (Unbenannt) speichern?
The file '^0' has been modified. Should it be reloaded?=Die Datei '^0' hat sich ge�ndert. Soll sie neu geladen werden?
Bad file.=Fehlerhafte Datei.
Failed to create dialog box: ^0.=Der Dialog '^0' konnte nicht erzeugt werden.
Can not start printer document.=Der Druckdialog konnte nicht gestartet werden.
URI '^0' not understood.=URI '^0' unbekannt.
Invalid directory '^0'.=Ung�ltiges Verzeichnis '^0'.

# 1.42
Directory:=&Verzeichnis:
Wrap=&Zeilenumbruch
Hide=&Verstecken
Check if already open=SciTE nur &einmal starten

# 1.43
Find string must not be empty for 'Replace in Selection' command.=Der Suchbegriff darf nicht leer sein, wenn "In Markierung ersetzen' gew�hlt wurde.
List Macros=&Makros anzeigen
Run Current Macro=&Aktuelles Makro ausf�hren
Record Macro=Makro auf&zeichnen
Stop Recording Macro=Makroaufzeichnung &beenden
SciTE Help=Hilfe zu &SciTE
Sc1 Help=Hilfe zu &Sc1
Edit Properties=&Eigenschaften bearbeiten
Wrap Output=Zeilenumbruch der &Ausgabe

# 1.44
Read-Only=&Schreibgesch�tzt
READ=LESEN

# 1.46
Save a Copy=&Kopie speichern unter
As TeX=Als &TeX
Read-Only=&Schreibgesch�tzt

# 1.47
As LaTeX=Als &LaTeX
Export File As LaTeX=Als LaTeX-Datei exportieren
Export File As TeX=Als TeX-Datei exportieren
Encoding=K&odierung
8 Bit=&8 Bit
UCS-2 Big Endian=UCS-2 &Big Endian
UCS-2 Little Endian=UCS-2 &Little Endian
UTF-8=&UTF-8

# 1.49
Save All=Alle &speichern
Browse=&Verzeichnis
Select a folder to search from=Startverzeichnis f�r Suche ausw�hlen
UTF-8 Cookie=UTF-8 &Cookie

# 1.50
Insert Abbreviation=Abk�rzung ein&f�gen
Abbreviation:=Abk�rzung:
Insert=&Einf�gen
Mark All=Alle &markieren

# 1.51
In Selection=In Markierung
Paragraph=Absa&tz
Join=&Zusammenf�gen
Split=&Aufteilen

# 1.52
Block comment variable '^0' is not defined in SciTE *.properties!=Die Block-Kommentarvariable '^0' ist nicht in den SciTE *.properties-Dateien definiert!
Box comment variables '^0', '^1' and '^2' are not defined in SciTE *.properties!=Die Box-Kommentarvariablen '^0', '^1' und '^2' sind nicht in den SciTE *.properties-Dateien definiert!
Stream comment variables '^0' and '^1' are not defined in SciTE *.properties!=Die Stream-Kommentarvariablen '^0' und '^1' sind nicht in den SciTE *.properties-Dateien definiert!
The file '^0' has been modified outside SciTE. Should it be reloaded?=Die Datei '^0' wurde au�erhalb von SciTE ver�ndert. Soll sie neu geladen werden?
As PDF=Als &PDF
Export File As PDF=Als PDF-Datei exportieren

# 1.53
Version=Version
by=von

# 1.54
Incremental Search=&Inkrementelle Suche
Search for:=Suche nach:

# 1.55
Could not save file '^0'. Save under a different name?=Datei '^0' konnte nicht gespeichert werden. Speichern unter anderem Namen?

# 1.56
As XML=Als &XML
Export File As XML=Als XML-Datei exportieren

# 1.57
Destination Line:=Sprungziel &Zeile:
Column:=&Spalte:

# 1.58
Replacements:=Ersetzungen:
Open Files Here=Dateien hier �ffnen

# 1.59

# 1.60

# 1.61
File '^0' is ^1 bytes long,\nlarger than the ^2 bytes limit set in the properties.\nDo you still want to open it?=Die Datei '^0' ist ^1 Bytes gro�,\ngr��er als der in den Vorgaben eingestellte Grenzwert von ^2 Bytes.\nSoll die Datei trotzdem ge�ffnet werden?
Open Lua Startup Script=�ffne Lua Programmstart-Script
All Files (*)=Alle Dateien (*)
Hidden Files (.*)=Versteckte Dateien (.*)

#1.62
Show hidden files=Zeige versteckte Dateien

#1.63
Replace in Buffers=Ersetze in Fenstern
Find string must not be empty for 'Replace in Buffers' command.=Der Suchbegriff darf nicht leer sein, wenn 'Ersetze in Fenstern' gew�hlt wurde.
Search only in this style:=Nur diese Formatierung:

#1.67
Duplicate=V&erdoppeln

#1.72
Convert=Umwandeln

#1.73
Code Page Property=Systemkodierung
UTF-8 with BOM=UTF-8 mit Markierung
Open Directory Options File=Verzeichniseinstellungen �ffnen

######################## You need to translate these entries if they have not been translated before
##1.63
#Replace in Buffers=
#Find string must not be empty for 'Replace in Buffers' command.=
#Search only in this style:=

##1.67
#Duplicate=

##1.72
#Convert=

##1.73
#Code Page Property=
#UTF-8 with BOM=
#Open Directory Options File=

############## ChIDE specific definitions ########
# Items in 'View' menu
Change Font Size=
# Font Dialog
Font Dialog=
Select Font Size:=
Debug=
Debug Bar=
Debug Pane=
Output Pane=
Clear Output Pane=
# Debug Console Window=
Debug Console Window=
Debug Console Window Always on Top=

# Items in 'Tools' menu
Link=
Indent=

# Items in 'Options' menu
# Items in 'Options' menu for Ch
Open Ch System Startup File=
Open Ch Local Startup File=
# Items in 'Options' menu for ChIDE
Open ChIDE User Abbreviations File=
Open ChIDE Global Abbreviations File=
Open ChIDE Local Options File=
Open ChIDE User Options File=
Open ChIDE Global Options File=
Open ChIDE Localization File=
# Items in 'Options' menu for languages
#Open cpp.properties=Open C/Ch/C++ Property File
#Open css.properties=Open CSS Property File
#Open html.properties=Open HTML/XML Property File
#Open sql.properties=Open SQL Property File
#Open tex.properties=Open TeX Property File
#Open others.properties=Open others Property File
Open cpp.properties=Open C/Ch/C++ Property File
Open css.properties=Open CSS Property File
Open html.properties=Open HTML/XML Property File
Open sql.properties=Open SQL Property File
Open tex.properties=Open TeX Property File
Open others.properties=Open others Property File

# Ch IDE menus
Start=
Continue=
Abort=
Step=
Next=
Up=
Down=
Break=
Clear=
Parse=
Run=
Stop=

Start (Debug the program from the beginning)=
Continue (Debug the program from the current location)=
Abort (Abort the running program)=
Step (Single step)=
Next (Step over the next statement)=
Up (Move up the call stack one function)=
Down (Move down the call stack one function)=
Break (Set a breakpoint at the selected line)=
Clear (Clear a breakpoint at the selected line)=
Clear Debug Command Pane=
Clear Debug Console Window=
#Display special variables in debug pane for local and all variables
Display special variables in debug pane for Locals and Variables=

Debug the program from the beginning <F5>=
Debug the program from the current location=
Abort the running program=
Single step <F6>=
Step over the next statement <F7>=
Move up the call stack one function=
Move down the call stack one function=
Set a breakpoint at the selected line=
Clear a breakpoint at the selected line=
Launch Ch Shell=
Parse the program=
Run the program (ignore breakpoints) <F2>=
Stop execution=
ChIDE Help=
About ChIDE=

# Ch Debugging Tooltips
Command=
Debug command window=
Stack=
Display function and program names in all stacks=
# local variables
Locals=
Display values of variables within scope=
# all variables
Variables=
Display values of variables in all stacks=
Watch=
Watch expressions and variables=
Breakpoints=
Display breakpoints=

# Ch Debugging Tabs.
# Translate "Breakpoint Number" to "Number"
# if the translation is longer than 6 characters
Expression=
Breakpoint Number=Number
Breakpoint Location=
Stack Level=
Stack Name=
# Translate "Name" to "Variable Name"
# if the translation is less than 6 characters
Name=
Value=

# Editing while debugging
Warning: Any changes made to the file during debugging will not be reflected in the current debugging session.=

# Ch editions
Professional Edition=
Evaluation Edition=
Student Edition=
Standard Edition=
Font sizes larger than 10pt are only available with Ch Professional Edition.=
Debug features are not available in Ch Standard Edition. Click 'Run' to run your program.=


# Tools menu
Next Error Message=
Previous Error Message=
# For argv in 'int main(int argc, char *argv[])'
Command Line Arguments=

# Ch Debugging Tooltips
Close debug pane=

# View menu
Default Layout=

