# locale.properties for Ch IDE user interface.
# To make your modification available in Ch IDE in the next release
# and available for others to use,
# please send your modified file to info(@)softintegration.com


# locale.properties defines the localised text for the user interface
# Some definitions are commented out because they duplicate another string
# The format of each line is original=localised, such as File=&Fichier
# Even though the original text may have ellipses "..." and access key
# indicators "&" in the user interface, these do not appear in this file
# for the original texts. Translated texts should have an access key indicator
# if needed as the translated text may not include the original access key.
# Ellipses are automatically added when needed.
# The "/" character should not be used in menu entries as on GTK+ the "/" is
# used to specifiy the menu hierarchy and so will produce extra menu items.
# Each original text may have only one translation, even if it appears in
# different parts of the user interface.

# Please state any further license conditions and copyright notices you desire.
# If there are no further notices then contributed translations will be assumed
# to be made freely available under the same conditions as SciTE.
# Email addresses included in this file may attract spam if the file is published.

# locale.properties --Castellano=Espa�ol, Argentina-- by Daniel Testa [daniel.testa.t@gmail.com]
# Contributors for the spanish language support:
# Original spanish translator is unknown 
# | v1.58 by The masked translator | v1.63 & v1.67 by Xukosky | v1.72 by Roberto Chamorro Paredes | v1.73 by Daniel Testa |

# Define the encoding of this file so that on GTK+ 2, the file can be
# reencoded as UTF-8 as that is the GTK+ 2 user interface encoding.
# A common choice for European users is LATIN1. For other locales look at
# the set of encodings supported by iconv.
translation.encoding=LATIN1

# Men�s

# Men� Archivo
File=&Archivo
New=&Nuevo
Open=A&brir
Open Selected Filename=Abrir archiv&o seleccionado
Revert=&Deshacer todo
Close=&Cerrar
Save=&Guardar
Save As=Guardar co&mo
Export=E&xportar
As HTML=Como &HTML
As RTF=Como &RTF
Page Setup=Con&figuraci�n de p�gina
Print=&Imprimir
Load Session=Cargar sesi�n
Save Session=Guardar seci�n
Exit=&Salir

# Men� Edici�n
Edit=&Edici�n
Undo=&Deshacer
Redo=&Rehacer
Cut=Cor&tar
Copy=&Copiar
Paste=&Pegar
Delete=&Borrar
Select All=&Seleccionar todo
Copy as RTF=Copiar como RTF
Match Brace=Coincidir con corch&ete
Select to Brace=Seleccionar hasta corc&hete
Show Calltip=Mostrar Ca&lltip
Complete Symbol=C&ompletar S�mbolo
Complete Word=Completar P&alabra
Expand Abbreviation=E&xpandir Abreviatura
Block Comment or Uncomment=Comentar o Descomentar Blo&que
Box Comment=Comentario de ca&ja
Stream Comment=Comentario de cade&na
Make Selection Uppercase=Cambiar selecci�n a ma&y�sculas
Make Selection Lowercase=Cambiar selecci�n a min�sc&ulas

# Men� Busqueda
Search=&B�squeda
Find=&Buscar
Find Next=Buscar &siguiente
Find Previous=Buscar &anterior
Find in Files=Buscar en archi&vos
Replace=&Reemplazar
Next Bookmark=Siguiente mar&cador
Previous Bookmark=Marcador a&nterior
Toggle Bookmark=Acticar/&Desactivar marcador
Clear All Bookmarks=Borar &todos los marcadores

# Men� Ver
View=&Ver
Toggle current fold=Abrir/Cerrar pliegue &actual
Toggle all folds=&Abrir/Cerrar &todos los pliegues
Full Screen=Pantalla &Completa
Tool Bar=Barra de &Herramientas
Tab Bar=Barra de &Pesta�as
Status Bar=Barra de E&stado
Whitespace=&Espacios
End of Line=&Fin de l�nea
Indentation Guides=&Gu�as de sangr�a
Line Numbers=&N�meros de l�nea
Margin=&M�rgenes
Fold Margin=Mar&gen de pliegues
Output=Panel de re&sultados
Parameters=Pa&r�metros

# Men� Herramientas
Tools=&Herramientas
Compile=&Compilar
Build=&Generar
Go=&Ejecutar
Stop Executing=&Detener ejecuci�n
Next Message=&Siguiente mensaje
Previous Message=&Mensaje anterior
Clear Output=&Limpiar panel de resultados
Switch Pane=Cambiar de &panel

# Men� Opciones
Options=&Opciones
Always On Top=Siempre &visible
Vertical Split=&Separaci�n vertical
Line End Characters=Caracteres de &fin de l�nea
CR + LF=CR &+ LF
CR=&CR
LF=&LF
Convert Line End Characters=Co&nvertir caracteres de fin de linea
Change Indentation Settings=Cambiar reglas de sangra&do
Use Monospaced Font=Usar letra no &proporcional
Open Local Options File=Abrir archivo de opciones Local&es
Open User Options File=Abrir archivo de opciones de &Ususario
Open Global Options File=Abrir archivo de opciones &Globales
Open Abbreviations File=Abrir archivo de Abrevia&turas

# Men� Lenguage
Language=&Lenguage

# Men� Documentos
Buffers=&Documentos
Previous=&Anterior
Next=&Siguiente
Close All=&Cerrar todos

# Men� Ayuda
Help=A&yuda
About Sc1=&Acerca de Sc1
About SciTE=&Acerca de SciTe

# Di�logos

# Di�logos gen�ricos
OK=&Aceptar
Cancel=&Cancelar
Yes=&S�
No=&No

# Di�logo Acerca de...
#Acerca de SciTe=
TranslationCredit=Traducci�n al Espa�ol 1.73 por Daniel Testa
Contributors:=Contribuidores:

# Di�logos Abrir y Guardar
Open File=Abrir archivo
Save File=Guardar archivo
Save File As=Guardar como
Export File As HTML=Exportar archivo como HTML
Export File As RTF=Exportar archivo como RTF
Save Current Session=Guardar sesi�n actual
Custom Filter=Filtro personalizado

# Di�logo Buscar en archivos
#Find in Files=Buscar en archivos =
Find what:=&Buscar qu�:
Files:=&Archivos:
#Find=Buscar

# Di�logo Ir a...
Go To=&Ir a
Destination Line Number:=&L�nea de destino
Current line:=L�nea &actual
Last line:=&�ltima l�nea

# Di�logo Reglas de sangrdo
Indentation Settings=Reglas de sangrado
Tab Size:=Tama�o &tabulaci�n:
Indent Size:=Tama�o de &sangria
Use tabs:=&Usar tabuladores:

#Di�logo Buscar y Reemplazar
#Replace=Reemplazar
#Find=Buscar
#Find what:=Buscar qu�:
Replace with:=&Reemplazar con
Match whole word only=Solo &palabra completa
Match case=&May�s./Min�s.
Regular expression=&Expresi�n regular
#bad traslation?????
Wrap around=Envolver &alrededor
Transform backslash expressions=&Transformar expresiones con caracteres '\'
#Find Next=Buscar siguiente
Replace All=Reemplazar &todo
Replace in Selection=Reemplazar en &selecci�n
#Close=Cerrar
Direction=&Direci�n
Reverse direction=Direci�n &contraria
Up=&Arriba
Down=A&bajo

# Di�logo Par�metros
Execute=&Ejacutar
Set=&Establecer

# Otras Cadenas de la Intrefaz de Usuario
Untitled=sin_t�tulo

# Propiedades  usadas en opciones globales
Text=&Texto
All Source=Todos los archivos de "c�digo fuente"
All Files (*.*)=Todos (*.*)

# Mensajes
#Los mensajes pueden contener variables tales como nombres de archivo o  secuencias de b�squeda indicadas
#Por ^0 el cu�l es substituido por un valor antes de mostrarse. ^1, ^2, ... quiz� sean usados en el futuro
Can not find the string '^0'.=No fue posible encontrar la expresi�n '^0'.
Find string must not be empty for 'Replace All' command.=Debe especificar la expresi�n que desea reemplazar antes de utilizar el comando 'Reemplazar todo'.
Selection must not be empty for 'Replace in Selection' command.=Debe realizar una selecci�n antes de utilizar el comando 'Reemplazar en selecci�n'.
No replacements because string '^0' was not present.=No se efectuaron reemplazos porque no se encontr� '^0'. 
Could not open file '^0'.=No se pudo abrir el archivo '^0'.
Could not save file '^0'.=No se pudo guardar el archivo '^0'.
Save changes to '^0'?=�Guardar cambios a '^0'?
Save changes to (Untitled)?=�Guardar cambios a (sin_t�yulo)?
The file '^0' has been modified. Should it be reloaded?=El archivo '^0' ha sido modificado. �Desea recargarlo?
Bad file.=Archivo incorrecto
Failed to create dialog box: ^0.=No se pudo crear la ventana ^0.
Can not start printer document.=No se pudo comenzar a imprimir el documento.
URI '^0' not understood.=URI '^0' incomprensible.
Invalid directory '^0'.=Carpeta '^0' no v�lida.

# 1.42
Directory:=&Carpeta
Wrap=Ajustar a &pantalla
Hide=&Ocultar
Check if already open=&Verificar si ya est� abierto

# 1.43
Find string must not be empty for 'Replace in Selection' command.=Debe elegir una secuencia de b�squeda antes de 'Reemplazar en selecci�n'.
List Macros=Listar macros
Run Current Macro=Ejacutar macro actual
Record Macro=Grabar macro
Stop Recording Macro=Detener grabaci�n de macro
SciTE Help=A&yuda de SciTe
Sc1 Help=A&yuda de Sc1
Edit Properties=&Editar propiedades
Wrap Output=Ajuste de l�nea Panel de resultados

# 1.44
Read-Only=S&olo Lectura
READ=&Leer

# 1.46
As TeX=Como &TeX
Export File As TeX=Exportar como &TeX
Save a Copy=Guardar una copia

# 1.47
As LaTeX=Como La&TeX
Export File As LaTeX=Exportar como La&TeX
Encoding=Co&dificaci�n
8 Bit=&8 Bit
UCS-2 Big Endian=UCS-2 &Big Endian
UCS-2 Little Endian=UCS-2 &Little Endian
UTF-8=&UTF-8

# 1.49
Save All=&Guardar todos
Browse=E&xaminar
Select a folder to search from=Seleccionar una carpeta donde buscar
UTF-8 Cookie=UTF-8 &Cookie

# 1.50
Insert Abbreviation=&Insertar abreviatura
Abbreviation:=Abreviatura
Insert=Insertar
Mark All=Marcar todo

# 1.51
In Selection=En selecci�n
Paragraph=P�rrafo
Join=&Unir
Split=&Dividir

# 1.52
Block comment variable '^0' is not defined in SciTE *.properties!=La variable '^0' del bloque de comentario no est� definida en *.properties de SciTE!
Box comment variables '^0', '^1' and '^2' are not defined in SciTE *.properties!=Las variables '^0', '^1' and '^2' del cuadro de comentario no est�n definidas en *.properties de SciTE!
Stream comment variables '^0' and '^1' are not defined in SciTE *.properties!=Las variables '^0' y '^1' del flujo de comentario no est�n definidas en *.properties de SciTE!
The file '^0' has been modified outside SciTE. Should it be reloaded?=El archivo '^0' ha sido modificado fuera de SciTE. �Desea recargarlo?
As PDF=Como &PDF
Export File As PDF=Exportar como &Pdf

# 1.53
Version=Versi�n
by=Por

#1.54
Incremental Search=B�squeda &Incremental
Search for:=Buscar por:

#1.55
Could not save file '^0'. Save under a different name?=No se pudo guardar el archivo '^0'. �Desea guardarlo con un nombre distinto?

#1.56
As XML=Como &XML
Export File As XML=Exportar como &XML

#1.57
Destination Line:=&L�nea destino
Column:=&Columna

#1.58
Replacements:=Cambios realizados:
Open Files Here=&Abrir archivos aqu�

#1.59

#1.60

#1.61
File '^0' is ^1 bytes long,\nlarger than the ^2 bytes limit set in the properties.\nDo you still want to open it?=El archivo '^0' tiene ^1 bytes,\nm�s de los ^2 bytes de l�mite establecidos en las propiedades.\nDesea abrirlo igualmente?
Open Lua Startup Script=Abrir script de inicio &Lua
All Files (*)=Todos los archivos(*)
Hidden Files (.*)=Archivos ocultos (.*)

#1.62
Show hidden files=Mostrar archivos ocultos

#1.63
Replace in Buffers=Reemplazar en documentos
Find string must not be empty for 'Replace in Buffers' command.=Debe elegir una secuencia de b�squeda antes de 'Reemplazar en documentos'.
Search only in this style:=Buscar s�lo en este estilo:

#1.67
Duplicate=Duplicado

#1.72
Convert=Convertir

#1.73
Code Page Property=Codificaci�n propia de la p�gina
UTF-8 with BOM=UTF-8 con BOM
Open Directory Options File=Abrir archivo de opciones de Car&peta

######################## You need to translate these entries if they have not been translated before
##1.63
#Replace in Buffers=
#Find string must not be empty for 'Replace in Buffers' command.=
#Search only in this style:=

##1.67
#Duplicate=

##1.72
#Convert=

##1.73
#Code Page Property=
#UTF-8 with BOM=
#Open Directory Options File=

############## ChIDE specific definitions ########
# Items in 'View' menu
Change Font Size=
# Font Dialog
Font Dialog=
Select Font Size:=
Debug=
Debug Bar=
Debug Pane=
Output Pane=
Clear Output Pane=
# Debug Console Window=
Debug Console Window=
Debug Console Window Always on Top=

# Items in 'Tools' menu
Link=
Indent=

# Items in 'Options' menu
# Items in 'Options' menu for Ch
Open Ch System Startup File=
Open Ch Local Startup File=
# Items in 'Options' menu for ChIDE
Open ChIDE User Abbreviations File=
Open ChIDE Global Abbreviations File=
Open ChIDE Local Options File=
Open ChIDE User Options File=
Open ChIDE Global Options File=
Open ChIDE Localization File=
# Items in 'Options' menu for languages
#Open cpp.properties=Open C/Ch/C++ Property File
#Open css.properties=Open CSS Property File
#Open html.properties=Open HTML/XML Property File
#Open sql.properties=Open SQL Property File
#Open tex.properties=Open TeX Property File
#Open others.properties=Open others Property File
Open cpp.properties=Open C/Ch/C++ Property File
Open css.properties=Open CSS Property File
Open html.properties=Open HTML/XML Property File
Open sql.properties=Open SQL Property File
Open tex.properties=Open TeX Property File
Open others.properties=Open others Property File

# Ch IDE menus
Start=
Continue=
Abort=
Step=
Next=
Up=
Down=
Break=
Clear=
Parse=
Run=
Stop=

Start (Debug the program from the beginning)=
Continue (Debug the program from the current location)=
Abort (Abort the running program)=
Step (Single step)=
Next (Step over the next statement)=
Up (Move up the call stack one function)=
Down (Move down the call stack one function)=
Break (Set a breakpoint at the selected line)=
Clear (Clear a breakpoint at the selected line)=
Clear Debug Command Pane=
Clear Debug Console Window=
#Display special variables in debug pane for local and all variables
Display special variables in debug pane for Locals and Variables=

Debug the program from the beginning <F5>=
Debug the program from the current location=
Abort the running program=
Single step <F6>=
Step over the next statement <F7>=
Move up the call stack one function=
Move down the call stack one function=
Set a breakpoint at the selected line=
Clear a breakpoint at the selected line=
Launch Ch Shell=
Parse the program=
Run the program (ignore breakpoints) <F2>=
Stop execution=
ChIDE Help=
About ChIDE=

# Ch Debugging Tooltips
Command=
Debug command window=
Stack=
Display function and program names in all stacks=
# local variables
Locals=
Display values of variables within scope=
# all variables
Variables=
Display values of variables in all stacks=
Watch=
Watch expressions and variables=
Breakpoints=
Display breakpoints=

# Ch Debugging Tabs.
# Translate "Breakpoint Number" to "Number"
# if the translation is longer than 6 characters
Expression=
Breakpoint Number=Number
Breakpoint Location=
Stack Level=
Stack Name=
# Translate "Name" to "Variable Name"
# if the translation is less than 6 characters
Name=
Value=

# Editing while debugging
Warning: Any changes made to the file during debugging will not be reflected in the current debugging session.=

# Ch editions
Professional Edition=
Evaluation Edition=
Student Edition=
Standard Edition=
Font sizes larger than 10pt are only available with Ch Professional Edition.=
Debug features are not available in Ch Standard Edition. Click 'Run' to run your program.=


# Tools menu
Next Error Message=
Previous Error Message=
# For argv in 'int main(int argc, char *argv[])'
Command Line Arguments=

# Ch Debugging Tooltips
Close debug pane=

# View menu
Default Layout=

